LeCroy 4413 16-ch 150 MHz Discriminator
 =============================================


 CAMAC Commands
 ~~~~~~~~~~~~~~

 N F(O)  A(O) :  Reads mask register. Q response in Remote mode only.
 N F(l)  A(O) :  Reads threshold setting when in Local or Remote mode.
 N F(16) A(O) :  Writes mask register pattern (Wl-W16).
                 Executable and Q response generated in Remote mode only.
 N F(17) A(O) :  Writes threshold setting register, 11 bits:
                 10 bits of data (W1-W10) providing 1 mV resolution are
                 used to program common threshold and
                 1 bit (Wll) to set the manual threshold value (front-panel
                 screwdriver control) to the threshold register.
                 In this case, the data presented on Wl-W10 is ignored.
                 Executable and Q response generated in Remote mode only.
 N F(25) A(O) :  Test function.
                 Only channels not masked off by F(16) are triggered by
                 internally generated 3 nsec wide pulse.
                 Executable and Q response generated in Remote mode only.
 N F(24) A(O) :  Set Local mode.
 N F(26) A(O) :  Set Remote mode.

 Z :   Clears mask register at S2 time, sets module into Local mode.


 CAMAC Responses
 ~~~~~~~~~~~~~~~

 X :  An X=1 response is generated for every valid F,N,A.
 Q :  A  Q=l response is generated if the valid command can be executed.

-----------------------------------------------------

Note:
 Updating/Burst Guard operational modes choose only by
 rear-panel Updating/Burst Guard Switch which allows the
 selection of the operational mode.