LeCroy 3412/3412E 16-ch 200 MHz Discriminator
 =============================================


 CAMAC FUNCTION CODES
 ~~~~~~~~~~~~~~~~~~~~

 F(0) A(0) N :  Reads mask            (R1-R16).
 F(0) A(1) N :  Reads Threshold       (R1-R12).
 F(0) A(2) N :  Reads Width           (R1-R12).
 F(0) A(3) N :  Reads Updating Status (R1). 1 = Updating,       0 = Non-updating.
 F(0) A(3) N :  Reads Burst Guard     (R2). 1 = Burst Guard On, 0 = No Burst Guard.

 F(16) A(0) N S1 :  Writes Mask        (W1-W16).
 F(16) A(1) N S1 :  Writes Threshold   (W1-W12).
 F(16) A(2) N S1 :  Writes Width       (W1-W12).
 F(16) A(3) N S1 :  Sets Updating Mode (W1). 1 = Updating,    0 = Non-updating.
 F(16) A(3) N S1 :  Sets Burst Guard   (W2). 1 = Burst Guard, 0 = No Burst Guard.

 F(24) A(0) N S1 :  Set to Local mode.
 F(25) A(0) N S1 :  Test.
 F(26) A(0) N S1 :  Set to Remote mode.
 F(27) A(0) N S1 :  Checks Remote/Local mode. Q = 1 only if in Remote mode.



 CAMAC COMMANDS
 ~~~~~~~~~~~~~~

 I    :  Inhibits all discriminator channels.
 Z S2 :  Clears all registers. Sets Local/Remote to Local.
 C S2 :  Clears all registers. Sets Local/Remote to Local.
 X    :  Generated for all valid functions.
 Q    :  Generated if a function can be executed.

-----------------------------------------------------

Note:
 The 3412 will power up in the Local mode.
 In Local mode the user can set the threshold and width by front-panel pots,
 the mode of the discriminator (Updating and Burst Guard) can be set by
 a side-panel DIP switch.