|
Used for:
|
RTclient, RTmon, and RTgms processes
|
|
Type:
|
Real Number
|
|
Default Value:
|
30.0
|
|
Valid Values:
|
Any real number 0.0 or greater
|
The Server_Write_Timeout option specifies how often (in seconds) data is expected to be able to be written to the connection to RTserver. This timeout is used to check for possible network failures. If a write timeout occurs, then the connection to RTserver is destroyed, and RTclient, RTmon, or RTgms attempts to create a new connection to RTserver. Checking for write timeouts is disabled if Server_Write_Timeout is set to 0.0. The larger the value for Server_Write_Timeout, the longer the RT process must wait to detect a possible RTserver failure. If Server_Write_Timeout is set too low, however, the RT process may think that it has lost its connection to RTserver when the RTserver is merely very busy.
This option is required and cannot be unset.
|
TIBCO SmartSockets™ User’s Guide Software Release 6.8, July 2006 Copyright © TIBCO Software Inc. All rights reserved www.tibco.com |