CLONWiki - User contributions [en]

Linux Installation Procedure

2015-01-05T20:47:26Z

129.57.86.64: /* RHEL6 */

== RHEL6 ==

Installed using CD provided by Computer Center. Requires MAC address to be registered with Computer Center (using jnet.jlab.org as 'boiarino') because it is network-based installation.

'''NOTE: all disks will be reformatted in a process, all information will be lost !'''

Dialog:

* boot: <enter>

* ...[D]esktop: <enter>

* root password: enter root password

* admin user: boiarino

Installation will proceed. When prompted, remove installation disk and reboot machine if not done automatically. After reboot patching process will be started and it will take a while, do not interrupt it, otherwise system will not be installed correctly.

yum install libXpm-devel (in addition to others)

== RHEL5 ==

Installed using CD provided by Computer Center. Requires MAC address to be registered with Computer Center (email to helpdesk@jlab.org) because it is network-based installation.

Dialog:

* boot: <enter>

* ...[D]esktop: Server (it is ignored, will do Desktop anyway ...)

* root password: enter root password

* system user: <enter>

* manually partition disk: 100MB /boot, 2048 etc MB swap, the rest /.

'''CFENGINE''': there are procesess restoring some system config files (in particular ''/etc/ssh/sshd_config'') in according to the Computer Center - maintained templete. To shut them down: (1) comment out ''cfengine''-related stuff in root cronjobs; (2) do ''/etc/init.d/cfengine stop''; (3) do ''chkconfig cfengine off''. Ask CC (Sherman White, Paul Letta) to fix templete.

Run ''/usr/bin/system-config-authentication'' and set NIS servers list as ''clon00,clon10,nis1''.

Add following in the end of ''/etc/passwd'':
clasrun:x:2508:9998:Online DAQ:/home/clasrun:/bin/tcsh
clas12run:x:6007:146:clas12run Account:/home/clas12run:/bin/tcsh
clascron:x:6005:146:CLAS Cron Jobs:/home/clascron:/bin/tcsh
clasboot:x:6000:146:Boot Scripts Only:/home/clasboot:/bin/tcsh
clasmail:x:6003:146:CLAS Automated Mail:/home/clasmail:/bin/tcsh
epics:x:5001:146:EPICS Account:/home/epics:/bin/tcsh
nagios:x:6246:9997:Nagios:/home/nagios:/bin/tcsh
+@clon_cluster::::::
+@ccc::::::

Add following in the end of ''/etc/group'':
onliners::9998:heyes,hujl,rwm,timmer,wolin,taylorw,cuevas,abbottd,abulafia,anciant,anghi,aswin,auger,avakian,banta,barrow,battagli,bjlee,bogdan,brooksw,bruhwel,boiarino,buckle,burchesk,burin,bzh,cetina,chen,cole,cords,corvi,costy,davidl,costy,davidl,dcarter,dcurry,dennisl,deppman,dhlee,doughty,drago,dytman,dugger,dugger,elton,fedro,ficenec,fklein,france,freyberg,gholden,gilfoyle,golovach,gurjyan,haddock,heddle,jenkins,jhardie,jmorris,kellyk,klusman,kmkim,kossov,lcsmith,longhi,manak,marchand,marki,mastersj,mjohnson,mosbackr,mueller,muguira,murphyl,necaise,odonnell,opper,parkkj,pasyuk,phkim,piot,riccardi,richardt,ripani,rossi,saw,sergpozd,serov,sholt,staylor,taiuti,tang,tedeschi,vineyard,vlassov,vvsap,weygand,wooyoung,burchesk,clasrun,giovanet,clasboot,clascoda,clasroot,clasmail,clascron,trigger,epics,southern,carstens,ccutter,danagu,heyes,huertas,jacobsg,kliv,lachniet,mestayer,primex,hovanes,nerses,sytnik
clon::383:clascoda,clascron,clasmail
nagios::9997:nagios

Create ''/etc/shadow'' files with entries for users clasrun, epics and nagios (copy from another machine).

Install updates: normally all updates should be installed by now, it can be done manually by commands
yum list updates
yum update

Configure [[SSH]].

Install missing packages:
yum install openmotif-devel xinetd mysql-devel cmake

Some additional packages on request (for EPICS):

yum install mc lapack lapack-devel blas blas-devel giflib-devel

Proceed to the [[Linux Customization on CLON Cluster]].

'''PROBLEMS''':

1. /usr/lib/libg2c.so link is missing

FIXED ??? 2. /usr/lib/libXm.so link is missing

3. Created /etc/shadow file for clasrun, epics and nagios

== RHEL4 ==

Get RHEL4 CDs from Paul Letta.

Connect terminal, keyboard and mouse.

Boot from CD1. Follow instructions. When asked, choose following options:

* Choose 'Manually partition with Disk Druid', set /boot to 100MB, then / to 40GB, then swap to 8192MB or at least double memory size. The rest of disk can be set as /space.

* Network: choose manually, type clonpc2.jlab.org; click 'EDIT', deactivate 'Configure using DHCP',
type IP address and netmask (255.255.255.0), click Ok.
Type Gateway (for example 129.57.167.99) and 3 DNS servers (129.57.167.5,129.57.167.14,129.57.32.100).

* Choose 'No firewall'

* Disable 'SELinux'

* Choose 'Customize software packages to be installed', click 'Everything'.

You will be asked to install CD2, CD3 and CD4, then CD1 again.
Then you will be asked to click 'Reboot'. First remove CD, then click 'Reboot'.
You will be asked few more questions. When asked to activate service, choose
'Tell me why I need to register ..' and click 'Next'. Choose 'I can not complete registration ..'
and click 'Next'. You will see 'System user' screen, click 'Use network login..'.
Choose 'Enable NIS support' and click 'Configure NIS'. Type NIS Domain: 'CCCHP' and NIS Server: clon00.jlab.org.
Finish installation process.

* fix files ''/etc/passwd'', ''/etc/shadow'' and ''/etc/group'' adding clasrun etc (see examples on another machines).

'''NOTE''': if machine has multiple network ports, Linux may not assign them properly to specified IP names and addresses. If problem occures, open network GUI and delete all existing records. After that, click ''New'' and pick hadrware port you want to configure from the list of available ports (tricky part is to know which RJ-45 connector corresponds to which port ..). Configure and activate it, make sure it works. Repeat for other ports. Results will be stored in directory ''/etc/sysconfig/network-scripts'', file names will be ''ifcfg-eth0'', ''ifcfg-eth1'' etc. If modifying those files manually, restart network by ''/etc/init.d/network restart''. Finally, set routing, for example for ''clonmon'' command ''route -n'' shows following:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
129.57.160.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
129.57.68.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
129.57.69.0 0.0.0.0 255.255.255.0 U 0 0 0 dev5937
129.57.64.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3
0.0.0.0 129.57.68.100 0.0.0.0 UG 0 0 0 eth3
Run following commands:
/sbin/route add -net 129.57.160.0 netmask 255.255.255.0 gw 129.57.160.5 dev eth1
/sbin/route add -net 129.57.68.0 netmask 255.255.255.0 gw 129.57.68.26 dev eth3
/sbin/route add -net 129.57.69.0 netmask 255.255.255.0 gw 129.57.69.206 dev dev5937
/sbin/route add -net 129.57.64.0 netmask 255.255.255.0 gw 129.57.64.57 dev eth0
Now ''route -n'' shows following:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
129.57.160.0 129.57.160.5 255.255.255.0 UG 0 0 0 eth1
129.57.160.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
129.57.68.0 129.57.68.26 255.255.255.0 UG 0 0 0 eth3
129.57.68.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
129.57.69.0 129.57.69.206 255.255.255.0 UG 0 0 0 dev5937
129.57.69.0 0.0.0.0 255.255.255.0 U 0 0 0 dev5937
129.57.64.0 129.57.64.57 255.255.255.0 UG 0 0 0 eth0
129.57.64.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3
0.0.0.0 129.57.68.100 0.0.0.0 UG 0 0 0 eth3
In that example automount will do configured using ''clonmon-daq1'' interface, because default ''clonmon'' interface is on external subnet. To make that routing table permanent (retore it after reboot) I tried to add four files with following contents to the ''/etc/sysconfig/network-scripts'' directory:
route-eth1:
GATEWAY0=129.57.160.5
NETMASK0=255.255.255.0
ADDRESS0=129.57.160.0
route-eth3:
GATEWAY0=129.57.68.26
NETMASK0=255.255.255.0
ADDRESS0=129.57.68.0
route-dev5937:
GATEWAY0=129.57.69.206
NETMASK0=255.255.255.0
ADDRESS0=129.57.69.0
route-eth0:
GATEWAY0=129.57.64.57
NETMASK0=255.255.255.0
ADDRESS0=129.57.64.0
It did not worked. Then I added four ''/sbin/route add ..'' lines to ''/etc/rc.local'' script, and it worked.

From now on you can use remote 'ssh' connection.

* To configure your system to use the patch server, issue the following commands as root:
# mount jlabsite:/site /mnt
# /mnt/CC/linux/satellite-connect --patchall
The script will prompt you for an activation key, but if you don't know what this is, just hit ENTER and it will use a sensible default. Depending on how many patches need to be applied to your system to bring it up to the current level, this script may take a very long time to run. When it finishes, you should reboot your machine to make the new patches take effect.

To install updates later run ''up2date -uf'' as ''root''.

Configure [[SSH]].

* Proceed with [[Linux Customization on CLON Cluster]] if applicable.

To boot Linux in single user mode (no graphics), add ''single'' to the end of boot line during boot process.

== '''background info''' ==

'''Add startup script'''

Create script in ''/etc/init.d/'' directory (use existing scripts as example). Must have a line like
# chkconfig: - 91 09
which specifies start and stop order. Run commands
chkconfig --add <scriptname>
chkconfig --level 3 <scriptname> on
for every level you want that script to be executed (usualy 3 and/or 4 and/or 5). Check if it os done using command
chkconfig --list | grep <scriptname>

'''xxx'''

You can choose to download the RHEL operating system directly from the Red Hat Web site and not receive a media kit from HP containing the software. This scenario occurs when the media option AJR is deselected from the order. (The media kit option is always selected by default. )

It is necessary to register at the Red Hat Web site prior to download. Registration requires the activation code that each customer receives from HP when ordering either RHEL.

You can download RHEL for each available platform as four CD ISO images or one DVD ISO image.

Use the following procedure to download RHEL and create the installation media:

1.

Register and log in at the following Red Hat Web site:

www.redhat.com/rhn
2.

Click on channels and then select Red Hat Enterprise Linux ES (v.4 for 64–bit Intel Itanium).
3.

Select Downloads and then download the ISO images of install, compatibility and source disks

Files with ia64 in the name are for the Itanium platform.
4.

Create the CDs or a DVD from the ISO images.

IMPORTANT: Create the CDs or DVD using the contents of the ISO images. Do not create the CDs or DVD by burning the .iso files themselves to CD or DVD. For example, if you are using K3b to burn a CD, click Tools>CD>Burn CD Image, select the .iso image, then click Burn.

'''Bootup scripts''' for example for level 5 execution (multiuser with X):

cp <script-file> /etc/init.d/
chmod +x /etc/init.d/<script-file>
ln -s /etc/init.d/<scriptfile> /etc/rc.d/rc5.d/S50<scriptfile>
ln -s /etc/init.d/<scriptfile> /etc/rc.d/rc5.d/K50<scriptfile>

'''Changing hostname/IP address'''

Changing hostname on RHEL
1. Change the HOSTNAME line in /etc/sysconfig/network
2. Change the hostname (FQDN and alias) in /etc/hosts
3. Run '/bin/hostname new_hostname' for the hostname change to take effect immediately.
4. Run '/sbin/service syslog restart' for syslog to log using the new hostname.
A reboot is not required to change the system hostname.

IP address: You have to change the IP address entry in
/etc/sysconfig/network-scripts/ifcfg-eth0.

GE XVB601

2014-07-25T13:11:39Z

129.57.86.64: /* Customizing kernel installed in /diskless/Centos5/root */

Company site: [http://www.ge-ip.com/products/family/embedded-systems GE Intelligent Platforms]

== Module manufacturer information ==

Board page on company site: [http://www.ge-ip.com/products/3448 XVB601]

Documentation:
[https://clonwiki.jlab.org/wiki/clondocs/Docs/ge_xvb601_ds_gfa1299.pdf Datasheet]
[https://clonwiki.jlab.org/wiki/clondocs/Docs/ge_xvb601_hr_500-930007815-000_E.pdf Hardware Reference]
[https://clonwiki.jlab.org/wiki/clondocs/Docs/ge_522-9300800627-000_A.book.pdf Transition Module Installation Guide]
[https://clonwiki.jlab.org/wiki/clondocs/Docs/ge_Configuration_Guide_XVB601.pdf Product Configurations]
[https://clonwiki.jlab.org/wiki/clondocs/Docs/ge_Ruggedization_Levels_GFA-926a.pdf Ruggedization]

== yum update ==

https://coda.jlab.org/wiki/index.php/Maintaining_your_Diskless_Setup

== List of boards ==

* [01] 00:20:38:04:23:5E (pcal0)

* [02] 00:20:38:04:23:60 (svt2)

* [03] 00:20:38:04:29:2E (dcrb1)

* [04] 00:20:38:04:23:64 (ftof1)

* [05] Model: 14110110 SN: 63089370 MAC (eth1): 00:20:ce:f6:04:0e MAC (eth2): 00:20:ce:f6:04:0f (adcecal1)

* [06] Model: 14110110 SN: 63089318 MAC (eth1): 00:20:ce:f6:03:fe MAC (eth2): 00:20:ce:f6:03:ff (ftof0)

* [07] Model: 14110110 SN: 63089363 MAC (eth1): 00:20:ce:f6:03:fa MAC (eth2): 00:20:ce:f6:03:fb (ltcc0)

* Model: 14110110 SN: 63089332 MAC (eth1): 00:20:ce:f6:04:0a MAC (eth2): 00:20:ce:f6:04:0b (given to Ben 9-apr-2013 to be sent to Saclay)

== Initial settings ==

Install new board into VME crate. Connect ethernet to the upper LAN port, rs232 9600N1 serial line (optional), VGA monitor and USB keyboard. Turn on power, setup page should appear (for future reboots hold '''DEL''' key to enter setup). Goto '''Advanced->Onboard Device''', set memory size to '''512MB''' and enable '''Onboard Gigabit LAN 1'''. Goto '''Advanced->Serial Port Console Redirection''', enable '''COM1 Console Redirection''' and in '''Console Redirection Settings''' set '''Bits per second=9600'''. Goto '''Chipset->South Bridge Configuration->SATA Configuration''' and set '''SATA Mode Selection''' to '''AHCI'''. Do '''Save & Exit'''.

Sergey Boyarinov only: open web browser from '''clonweb''' and goto '''jnet.jlab.org'''. Login using CUE login and password. Click on '''Machine Registration''' button. Click '''Add Device'''. Fill in a form, for example:
Connection Type: wired
MAC address: 00:20:38:04:23:64
VLAN: VLAN 568 : Hall B Data Acquisition <choose from the list>
Hostname: tage2.jlab.org
IP address: 129.57.68.86 <unselect 'Automatically Assign Statis IP>
JLAB Username: boiarino
Has PII: no
Machine Type: other
Property Tag: F
Click '''Submit'''. Following message must shows up:
The device (00:20:38:04:23:64) has been successfully added to the registration table.
-----------------
The device (00:20:38:04:23:64) has been successfully added to the assignment table.
-----------------
(DHCP) This entry will be added to DHCP the next time the server restarts (about 10 seconds).
-----------------
hallb-rtr.jlab.org ethernet8/9 is not an access port, blip failed...

Add IP name to the [[clonfs1]] export list, if not done yet.

Recycle power. Messages on monitor must show successful DHCP connection. Go to the following section to setup TFTP etc.

== Software structure description ==

* following is installed in ''/tftpboot'' area on clon10 server:

linux-install/Centos5PAE_new/initrd.img
/initrd.img.backup
/vmlinuz
/msgs/boot.msg
/expert.msg
/general.msg
/param.msg
/rescue.msg
/snake.msg
/pxelinux.0
/pxelinux.cfg/81394458 -> croctest1
/81394459 -> croctest2
/croctest1
/croctest2
/default
/pxeos.xml

Every client must has a file in ''/pxelinux.cfg/'' area with the name containing IP address in HEX format, for example croctest1's IP is 129.57.68.88, so file name must be 81394458. It can be a symbolic link. The contents of the file for croctest1:

default Centos5PAE_new
label Centos5PAE_new
kernel Centos5PAE_new/vmlinuz
append initrd=Centos5PAE_new/initrd.img root=/dev/ram0 init=disklessrc NFSROOT=129.57.167.16:/vol/diskless/Centos5 ramdisk_size=31809 ETHERNET=eth0 SNAPSHOT=croctest1.jlab.org NISDOMAIN=CCCHP acpi=force vga=0x305 vmalloc=256MB console=ttyS0,9600

All settings in that file are more or less generic. To customize it for another client only ''SNAPSHOT=croctest1.jlab.org'' must be changed. Statement ''NFSROOT=129.57.167.16:/vol/diskless/Centos5'' defines the fileserver IP and directory where diskless Linux is located, in our case it is ''clonfs1''. Statement ''console=ttyS0,9600'' force Centos5 to send boot messages to the com port so they can be monitored using ''tsconnect''.

* diskless Linux is installed on ''clonfs1'' fileserver in ''/vol/diskless/Centos5'' volume. That volume is mounted on the clonpc3 RHEL machine as well, and all Centos5 installation was performed on clonpc3, as it described in EXPERT PART section below. Directory ''/diskless/Centos5/root'' will be mounted as ''/'' level on all diskless clients, so that part is generic for all clients. Custom areas in ''/diskless/Centos5/snapshot'' will be client-specific, for every new client new directory with appropriate name must be creates there using templete tar ball, for example:
tar xvf templete.jlab.org.tar
mv templete.jlab.org croctest1.jlab.org
* File ''files'' contains the list of all files/directories to be used from snapshot area rather then from root area, that file was created during Centos5 installation. File ''files.custom'' can be used to specify additional files/directories, not in use right now.

== Customizing kernel installed in ''/diskless/Centos5/root'' ==

After expert installation is done, following changes must be applied. They are similar to the RHEL installation on clon cluster PCs and servers:

* ''/usr/bin/system-config-network''

* fix ''/etc/passwd'', ''/etc/shadow'', ''/etc/group''

'''NOTE''': to add new used you may use command ''useradd'', for example
useradd -u 6246 -g nagios -d /home/nagios -c "Nagios" -s /bin/tcsh nagios
(add flag '-m' if want to force home directory creation).

* fix ''/etc/nsswitch.conf''

* fix ''/etc/yp.conf'' (add lines ''domain CCCHP server clon00.jlab.org'' and ''ypserver clon10.jlab.org'')

* fix ''/etc/sysconfig/network'' (add line ''NISDOMAIN=CCCHP'')

* ''/etc/init.d/ypbind start''

* ''chkconfig ypbind on''

* set RHEL-style [[automounts]]

* ''/etc/init.d/autofs restart''

* fix symbolic links to /apps, /home, /usr/local etc

To install updates, ssh to clonpc3 as ''root'' and execute following commands:
mount -o bind /misc /misc/diskless/Centos5/root/misc
mount -o bind /misc/apps /misc/diskless/Centos5/root/misc/apps
mount -o bind /misc/local /misc/diskless/Centos5/root/misc/local
mount -o bind /misc/home /misc/diskless/Centos5/root/misc/home
mount -o bind /misc/work /misc/diskless/Centos5/root/misc/work
mount -o bind /misc/clas /misc/diskless/Centos5/root/misc/clas
mount -o bind /misc/downloads /misc/diskless/Centos5/root/misc/downloads

Now you can start chroot environment: ''chroot /misc/diskless/Centos5/root''.

Fix yum proxy: add line ''proxy=http://jprox.jlab.org:8082'' to the file ''/etc/yum.conf'', and fix file ''/etc/yum.repos.d/CentOS-Base.repo'' by commenting out all ''mirrorlist=http:...'' lines and uncommenting all ''baseurl=http:...'' lines.

After that you can use ''yum'', for example:

yum install gcc-c++
yum install mysql-devel
yum install compat-gcc-34-g77
yum install libXpm-devel
yum install libXtst
yum install openmotif-devel
yum install java

If need local mysql server, do following (see [[MySQL Installation]] as well):

yum install mysql-server

In case of yum, rpm etc problems usually you have to rebuild dictionary, google the error message. Following may help:
mv /var/lib/rpm/__db* ~/
rpm --rebuilddb
and check using command:
rpm -qa

'''IMPORTANT''': to prevent controllers to hung, do following change in files ''/etc/sysconfig/network-scripts/ifcfg-eth0'', ''...eth1'' etc: instead of

ONBOOT=yes

it must be

ONBOOT=no

== CompactFlash ==

Local MySQL server startup:

ssh clondb1 as root
mysqldump -u root -p daq_daq > daq_daq.sql
mysqldump -u root -p daq_classvt > daq_classvt.sql

ssh as root
/sbin/chkconfig mysqld on
/etc/init.d/mysqld start
scp root@clondb1:/root/daq_classvt.sql .
scp root@clondb1:/root/daq_daq.sql .

mysql
mysql> CREATE USER 'root'@'clonweb0.jlab.org' IDENTIFIED BY '*********'; use mysql clon root password
mysql> GRANT ALL PRIVILEGES ON *.* TO 'root'@'clonweb0.jlab.org' WITH GRANT OPTION;

mysql> CREATE USER 'clasrun'@'localhost';
mysql> GRANT ALL PRIVILEGES ON *.* TO 'clasrun'@'localhost';

mysql> flush privileges;
mysql> create database daq_daq;
mysql> create database daq_classvt;
mysql> exit

mysql daq_daq < daq_daq.sql
mysql daq_classvt < daq_classvt.sql

Original CentOS installation on CompactFlash was done by Bryan Moffit. To clone flash card, insert it to the reader on macbook pro and do following:

dd if=/dev/rdisk1 conv=sync,noerror | gzip -c > disk1.img.gz

Replace it with empty one and do following:

gunzip -c disk1.img.gz | dd of=/dev/rdisk1

Repeat last step to all empty flash cards you want to program.

== EXPERT PART: setting everything from scratch using clonpc3 ==

GE XVB601

2014-07-25T13:10:17Z

129.57.86.64: /* Customizing kernel installed in /diskless/Centos5/root */

EPICS: HV : ADDING CRATES

2014-05-09T20:57:23Z

129.57.86.64:

* ssh clonioc1
* //no needed source ~sytnik/.cshrc_hallb_install

== To add crate to epics db ==

* //not needed, will restart later cioc_cron 0 // to kill ioc
* cd0 (for old CAEN it will be cd0o, for mpod cd0m)
* edit in db_generator.cpp
* change: '''NCRATES, slot_mask, slot_types in the following piece:'''

///----------------- CRATES/SLOTS CONFIGURATION FOR IOC ----------------------------

#define NCRATES 1
#define NSLOTS 16
enum {A1535, A1520};
int NCHANNELS[2] = {24, 12};

int slot_mask[NCRATES][NSLOTS]=
{ {1, 0, 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} };//, // crate 0
//{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} }; // crate 1

int slot_types[NCRATES][NSLOTS]={

{A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535 }//, // crate 0
//{A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535 }//, // crate 1

};

///-------------------------------------------------------------------------

* g++ -o hv_gen db_generator.cpp

* ./hv_gen // produce hvprod.db
* add new crate to ''startup.all''
* cioc_cron 2 // to restart ioc

== To add crate to the Qt GUI ==

* qtcreator &

* file >> Open File or Project >> /misc/clas12/epics/qt/epicsqt_v1/hv_control/hv_control.pro
- click "Configure Project"
(next times: file >> Recent Projects >> /misc/clas12/epics/qt/epicsqt_v1/hv_control/hv_control.pro)
* expand "+sources"
* double click mainwindow.cpp to display the file
* In the following piece change: ''NCRATES, 'board_names_by_crate, board_types_by_crate, hv_crate_names, hv_crate_types'''

Comment: B_HV001_5_P0 stands for
- Hall B
- Crate 1
- slot 5
- all channels (P0)

//------------------- CRATES/SLOTS CONFIGURATION FOR GUI----------------------------

//==================CONFIGURATION PIECE==============================================================

char *board_names_by_crate[3][16]={

{"B_HV000_0_P0","B_HV000_2_P0","B_HV000_4_P0", "B_HV000_6_P0","B_HV000_7_P0","B_HV000_8_P0",
"B_HV000_9_P0","B_HV000_10_P0","B_HV000_11_P0","B_HV000_12_P0","B_HV000_13_P0","B_HV000_14_P0",
"B_HV000_15_P0" ,"","",""} ,

{"B_HV001_0_P0","B_HV001_1_P0","B_HV001_2_P0","B_HV001_3_P0","B_HV001_4_P0","B_HV001_5_P0", "B_HV001_6_P0","B_HV001_7_P0"
,"B_HV001_8_P0","B_HV001_9_P0","B_HV001_10_P0","B_HV001_11_P0","B_HV001_12_P0","B_HV001_13_P0","B_HV001_14_P0","B_HV001_15_P0"}

/// {"B_DCRB_HV000_0_P0","B_DCRB_HV000_1_P0","B_DCRB_HV000_2_P0","B_DCRB_HV000_3_P0","B_DCRB_HV000_4_P0","B_DCRB_HV000_5_P0","B_DCRB_HV000_6_P0",
/// "B_DCRB_HV000_7_P0","B_DCRB_HV000_8_P0", "B_DCRB_HV000_9_P0","","","" ,"","",""},

/// {"b_wmpod_hv000_0_P0","b_wmpod_hv000_1_P0","b_wmpod_hv000_2_P0","","","","","","","","","","" ,"","",""}
};

int board_types_by_crate[3][16]={

{HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535,0,0,0} ,

{HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535}

/// {HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944,
/// HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, 0,0,0, 0,0,0},

/// {HvCrate::WMPOD_HV,HvCrate::WMPOD_HV,HvCrate::WMPOD_HV,0, 0,0,0,0, 0,0,0,0, 0, 0,0,0}
};

char *hv_crate_names[]={"crate #1 \n CAEN 1527","crate #2 \n CAEN 1527", "crate \n CAEN 527", "crate \n Wiener MPOD"};

char hv_crate_types[]={CrateButton::CAEN_1527, CrateButton::CAEN_1527, CrateButton::CAEN_527, CrateButton::WMPOD };

//--------------------------------------------------------------------------------------------------------------

* click hammer sign (left-bottom corner) to build the project

* cdhv

* cp hv_control $CLAS/epics/bin/$EPICS_HOST_ARCH/

* hv_control // to start GUI

CLON meeting April 30, 2014

2014-04-30T13:29:41Z

129.57.86.64: Created page with "Clas On-line Meeting, Wednesday, April 30 at 10am in Room A110 ------------------------------------------------------------------ 1. DCRB review preparations 2. CLAS12 installa..."

Clas On-line Meeting, Wednesday, April 30 at 10am in Room A110
------------------------------------------------------------------

1. DCRB review preparations

2. CLAS12 installation status

3. HPS status

CLON Group Meetings

2014-04-30T13:29:04Z

129.57.86.64: /* 2014 */

== 2006 ==

[[CLON meeting December 13, 2006]] >>>>> [[December 13, 2006 online meeting minutes]]

== 2007 ==

[[CLON meeting September 5, 2007]] >>>>> [[September 5, 2007 online meeting minutes]]

[[CLON meeting September 12, 2007]] >>>>> [[September 12, 2007 online meeting minutes]]

[[CLON meeting September 19, 2007]] >>>>> [[September 19, 2007 online meeting minutes]]

[[CLON meeting September 26, 2007]] >>>>> [[September 26, 2007 online meeting minutes]]

[[CLON meeting October 3, 2007]] >>>>> [[October 3, 2007 online meeting minutes]]

[[CLON meeting October 10, 2007]] >>>>> [[October 10, 2007 online meeting minutes]]

[[CLON meeting October 17, 2007]] >>>>> [[October 17, 2007 online meeting minutes]]

[[CLON meeting October 24, 2007]] >>>>> [[October 24, 2007 online meeting minutes]]

[[CLON meeting October 31, 2007]] >>>>> [[October 31, 2007 online meeting minutes]]

[[CLON meeting November 7, 2007]] >>>>> [[November 7, 2007 online meeting minutes]]

[[CLON meeting November 14, 2007]] >>>>> [[November 14, 2007 online meeting minutes]]

[[CLON meeting November 28, 2007]] >>>>> [[November 28, 2007 online meeting minutes]]

[[CLON meeting December 12, 2007]] >>>>> [[December 12, 2007 online meeting minutes]]

== 2008 ==

[[CLON meeting January 16, 2008]] >>>>> [[January 16, 2008 online meeting minutes]]

[[CLON meeting January 23, 2008]] >>>>> [[January 23, 2008 online meeting minutes]]

[[CLON meeting January 30, 2008]] >>>>> [[January 30, 2008 online meeting minutes]]

[[CLON meeting February 13, 2008]] >>>>> [[February 13, 2008 online meeting minutes]]

[[CLON meeting March 5, 2008]] >>>>> [[March 5, 2008 online meeting minutes]]

[[CLON meeting March 12, 2008]] >>>>> [[March 12, 2008 online meeting minutes]]

[[CLON meeting March 26, 2008]] >>>>> [[March 26, 2008 online meeting minutes]]

[[CLON meeting April 16, 2008]] >>>>> [[April 16, 2008 online meeting minutes]]

[[CLON meeting April 23, 2008]] >>>>> [[April 23, 2008 online meeting minutes]]

[[CLON meeting May 21, 2008]] >>>>> [[May 21, 2008 online meeting minutes]]

[[CLON meeting June 4, 2008]] >>>>> [[June 4, 2008 online meeting minutes]]

[[CLON meeting June 18, 2008]] >>>>> [[June 18, 2008 online meeting minutes]]

[[CLON meeting July 2, 2008]] >>>>> [[July 2, 2008 online meeting minutes]]

[[CLON meeting July 16, 2008]] >>>>> [[July 16, 2008 online meeting minutes]]

[[CLON meeting September 10, 2008]] >>>>> [[September 10, 2008 online meeting minutes]]

[[CLON meeting September 17, 2008]] >>>>> [[September 17, 2008 online meeting minutes]]

[[CLON meeting September 24, 2008]] >>>>> [[September 24, 2008 online meeting minutes]]

[[CLON meeting October 1, 2008]] >>>>> [[October 1, 2008 online meeting minutes]]

[[CLON meeting October 15, 2008]] >>>>> [[October 15, 2008 online meeting minutes]]

[[CLON meeting November 12, 2008]] >>>>> [[November 12, 2008 online meeting minutes]]

== 2009 ==

[[CLON meeting January 21, 2009]] >>>>> [[January 21, 2009 online meeting minutes]]

[[CLON meeting January 28, 2009]] >>>>> [[January 28, 2009 online meeting minutes]]

[[CLON meeting February 4, 2009]] >>>>> [[February 4, 2009 online meeting minutes]]

[[CLON meeting February 18, 2009]] >>>>> [[February 18, 2009 online meeting minutes]]

[[CLON meeting February 25, 2009]] >>>>> [[February 25, 2009 online meeting minutes]]

[[CLON meeting March 25, 2009]] >>>>> [[March 25, 2009 online meeting minutes]]

[[CLON meeting April 8, 2009]] >>>>> [[April 8, 2009 online meeting minutes]]

[[CLON meeting April 22, 2009]] >>>>> [[April 22, 2009 online meeting minutes]]

[[CLON meeting May 6, 2009]] >>>>> [[May 6, 2009 online meeting minutes]]

[[CLON meeting May 20, 2009]] >>>>> [[May 20, 2009 online meeting minutes]]

[[CLON meeting June 3, 2009]] >>>>> [[June 3, 2009 online meeting minutes]]

[[CLON meeting June 10, 2009]] >>>>> [[June 10, 2009 online meeting minutes]]

[[CLON meeting June 17, 2009]] >>>>> [[June 17, 2009 online meeting minutes]]

[[CLON meeting July 1, 2009]] >>>>> [[July 1, 2009 online meeting minutes]]

[[CLON meeting September 2, 2009]] >>>>> [[September 2, 2009 online meeting minutes]]

[[CLON meeting September 23, 2009]] >>>>> [[September 23, 2009 online meeting minutes]]

[[CLON meeting September 30, 2009]] >>>>> [[September 30, 2009 online meeting minutes]]

[[CLON meeting October 14, 2009]] >>>>> [[October 14, 2009 online meeting minutes]]

[[CLON meeting November 11, 2009]] >>>>> [[November 11, 2009 online meeting minutes]]

[[CLON meeting December 2, 2009]] >>>>> [[December 2, 2009 online meeting minutes]]

[[CLON meeting December 16, 2009]] >>>>> [[December 16, 2009 online meeting minutes]]

== 2010 ==

[[CLON meeting January 13, 2010]] >>>>> [[January 13, 2010 online meeting minutes]]

[[CLON meeting January 27, 2010]] >>>>> [[January 27, 2010 online meeting minutes]]

[[CLON meeting February 10, 2010]] >>>>> [[February 10, 2010 online meeting minutes]]

[[CLON meeting February 24, 2010]] >>>>> [[February 24, 2010 online meeting minutes]]

[[CLON meeting March 10, 2010]] >>>>> [[March 10, 2010 online meeting minutes]]

[[CLON meeting March 17, 2010]] >>>>> [[March 17, 2010 online meeting minutes]]

[[CLON meeting March 24, 2010]] >>>>> [[March 24, 2010 online meeting minutes]]

[[CLON meeting April 7, 2010]] >>>>> [[April 7, 2010 online meeting minutes]]

[[CLON meeting April 21, 2010]] >>>>> [[April 21, 2010 online meeting minutes]]

[[CLON meeting May 5, 2010]] >>>>> [[May 5, 2010 online meeting minutes]]

[[CLON meeting May 12, 2010]] >>>>> [[May 12, 2010 online meeting minutes]]

[[CLON meeting May 26, 2010]] >>>>> [[May 26, 2010 online meeting minutes]]

[[CLON meeting June 9, 2010]] >>>>> [[June 9, 2010 online meeting minutes]]

[[CLON meeting June 16, 2010]] >>>>> [[June 16, 2010 online meeting minutes]]

[[CLON meeting July 7, 2010]] >>>>> [[July 7, 2010 online meeting minutes]]

[[CLON meeting September 15, 2010]] >>>>> [[September 15, 2010 online meeting minutes]]

[[CLON meeting September 22, 2010]] >>>>> [[September 22, 2010 online meeting minutes]]

[[CLON meeting October 13, 2010]] >>>>> [[October 13, 2010 online meeting minutes]]

[[CLON meeting October 20, 2010]] >>>>> [[October 20, 2010 online meeting minutes]]

[[CLON meeting November 10, 2010]]>>>>> [[November 10, 2010 online meeting minutes]]

[[CLON meeting November 17, 2010]]>>>>> [[November 17, 2010 online meeting minutes]]

[[CLON meeting December 8, 2010]]>>>>> [[December 8, 2010 online meeting minutes]]

[[CLON meeting December 15, 2010]]>>>>> [[December 15, 2010 online meeting minutes]]

== 2011 ==

[[CLON meeting January 12, 2011]] >>>>> [[January 12, 2011 online meeting minutes]]

[[CLON meeting January 19, 2011]] >>>>> [[January 19, 2011 online meeting minutes]]

[[CLON meeting January 26, 2011]] >>>>> [[January 26, 2011 online meeting minutes]]

[[CLON meeting February 23, 2011]] >>>>> [[February 23, 2011 online meeting minutes]]

[[CLON meeting March 9, 2011]] >>>>> [[March 9, 2011 online meeting minutes]]

[[CLON meeting March 30, 2011]] >>>>> [[March 30, 2011 online meeting minutes]]

[[CLON meeting April 6, 2011]] >>>>> [[April 6, 2011 online meeting minutes]]

[[CLON meeting April 20, 2011]] >>>>> [[April 20, 2011 online meeting minutes]]

[[CLON meeting May 4, 2011]] >>>>> [[May 4, 2011 online meeting minutes]]

[[CLON meeting June 1, 2011]] >>>>> [[June 1, 2011 online meeting minutes]]

[[CLON meeting June 8, 2011]] >>>>> [[June 8, 2011 online meeting minutes]]

[[CLON meeting June 29, 2011]] >>>>> [[June 29, 2011 online meeting minutes]]

[[CLON meeting August 10, 2011]] >>>>> [[August 10, 2011 online meeting minutes]]

[[CLON meeting August 17, 2011]] >>>>> [[August 17, 2011 online meeting minutes]]

[[CLON meeting August 31, 2011]] >>>>> [[August 31, 2011 online meeting minutes]]

[[CLON meeting September 14, 2011]] >>>>> [[September 14, 2011 online meeting minutes]]

[[CLON meeting September 21, 2011]] >>>>> [[September 21, 2011 online meeting minutes]]

[[CLON meeting September 28, 2011]] >>>>> [[September 28, 2011 online meeting minutes]]

[[CLON meeting October 5, 2011]] >>>>> [[October 5, 2011 online meeting minutes]]

[[CLON meeting October 26, 2011]] >>>>> [[October 26, 2011 online meeting minutes]]

[[CLON meeting November 2, 2011]] >>>>> [[November 2, 2011 online meeting minutes]]

[[CLON meeting November 9, 2011]] >>>>> [[November 9, 2011 online meeting minutes]]

[[CLON meeting November 16, 2011]] >>>>> [[November 16, 2011 online meeting minutes]]

[[CLON meeting November 30, 2011]] >>>>> [[November 30, 2011 online meeting minutes]]

[[CLON meeting December 7, 2011]] >>>>> [[December 7, 2011 online meeting minutes]]

[[CLON meeting December 14, 2011]] >>>>> [[December 14, 2011 online meeting minutes]]

== 2012 ==

[[CLON meeting January 4, 2012]] >>>>> [[January 4, 2012 online meeting minutes]]

[[CLON meeting February 1, 2012]] >>>>> [[February 1, 2012 online meeting minutes]]

[[CLON meeting February 8, 2012]] >>>>> [[February 8, 2012 online meeting minutes]]

[[CLON meeting February 15, 2012]] >>>>> [[February 15, 2012 online meeting minutes]]

[[CLON meeting February 22, 2012]] >>>>> [[February 22, 2012 online meeting minutes]]

[[CLON meeting February 29, 2012]] >>>>> [[February 29, 2012 online meeting minutes]]

[[CLON meeting March 7, 2012]] >>>>> [[March 7, 2012 online meeting minutes]]

[[CLON meeting March 14, 2012]] >>>>> [[March 14, 2012 online meeting minutes]]

[[CLON meeting March 21, 2012]] >>>>> [[March 21, 2012 online meeting minutes]]

[[CLON meeting March 28, 2012]] >>>>> [[March 28, 2012 online meeting minutes]]

[[CLON meeting April 4, 2012]] >>>>> [[April 4, 2012 online meeting minutes]]

[[CLON meeting April 11, 2012]] >>>>> [[April 11, 2012 online meeting minutes]]

[[CLON meeting April 18, 2012]] >>>>> [[April 18, 2012 online meeting minutes]]

[[CLON meeting May 23, 2012]] >>>>> [[May 23, 2012 online meeting minutes]]

[[CLON meeting May 30, 2012]] >>>>> [[May 30, 2012 online meeting minutes]]

[[CLON meeting June 20, 2012]] >>>>> [[June 20, 2012 online meeting minutes]]

[[CLON meeting August 15, 2012]] >>>>> [[August 15, 2012 online meeting minutes]]

[[CLON meeting August 29, 2012]] >>>>> [[August 29, 2012 online meeting minutes]]

[[CLON meeting September 5, 2012]] >>>>> [[September 5, 2012 online meeting minutes]]

[[CLON meeting September 19, 2012]] >>>>> [[September 19, 2012 online meeting minutes]]

[[CLON meeting September 26, 2012]] >>>>> [[September 26, 2012 online meeting minutes]]

[[CLON meeting October 17, 2012]] >>>>> [[October 17, 2012 online meeting minutes]]

[[CLON meeting November 7, 2012]] >>>>> [[November 7, 2012 online meeting minutes]]

[[CLON meeting November 14, 2012]] >>>>> [[November 14, 2012 online meeting minutes]]

[[CLON meeting December 12, 2012]] >>>>> [[December 12, 2012 online meeting minutes]]

[[CLON meeting December 19, 2012]] >>>>> [[December 19, 2012 online meeting minutes]]

== 2013 ==

[[CLON meeting January 16, 2012]] >>>>> [[January 16, 2012 online meeting minutes]]

[[CLON meeting January 23, 2012]] >>>>> [[January 23, 2012 online meeting minutes]]

[[CLON meeting February 6, 2013]] >>>>> [[February 6, 2013 online meeting minutes]]

[[CLON meeting February 13, 2013]] >>>>> [[February 13, 2013 online meeting minutes]]

[[CLON meeting February 27, 2013]] >>>>> [[February 27, 2013 online meeting minutes]]

[[CLON meeting March 20, 2013]] >>>>> [[March 20, 2013 online meeting minutes]]

[[CLON meeting April 3, 2013]] >>>>> [[April 3, 2013 online meeting minutes]]

[[CLON meeting April 10, 2013]] >>>>> [[April 10, 2013 online meeting minutes]]

[[CLON meeting April 17, 2013]] >>>>> [[April 17, 2013 online meeting minutes]]

[[CLON meeting May 1, 2013]] >>>>> [[May 1, 2013 online meeting minutes]]

[[CLON meeting May 15, 2013]] >>>>> [[May 15, 2013 online meeting minutes]]

[[CLON meeting May 29, 2013]] >>>>> [[May 29, 2013 online meeting minutes]]

[[CLON meeting July 3, 2013]] >>>>> [[July 3, 2013 online meeting minutes]]

[[CLON meeting August 28, 2013]] >>>>> [[August 28, 2013 online meeting minutes]]

[[CLON meeting September 4, 2013]] >>>>> [[September 4, 2013 online meeting minutes]]

[[CLON meeting September 25, 2013]] >>>>> [[September 25, 2013 online meeting minutes]]

[[CLON meeting October 9, 2013]] >>>>> [[October 9, 2013 online meeting minutes]]

[[CLON meeting November 6, 2013]] >>>>> [[November 6, 2013 online meeting minutes]]

== 2014 ==

[[CLON meeting January 8, 2014]] >>>>> [[January 8, 2014 online meeting minutes]]

[[CLON meeting February 5, 2014]] >>>>> [[February 5, 2014 online meeting minutes]]

[[CLON meeting February 12, 2014]] >>>>> [[February 12, 2014 online meeting minutes]]

[[CLON meeting March 12, 2014]] >>>>> [[March 12, 2014 online meeting minutes]]

[[CLON meeting March 26, 2014]] >>>>> [[March 26, 2014 online meeting minutes]]

[[CLON meeting April 30, 2014]] >>>>> [[April 30, 2014 online meeting minutes]]

EPICS: HV : ADDING CRATES

2014-02-20T13:56:44Z

129.57.86.64: /* To add crate to the Qt GUI */

* ssh clonioc1
* source ~sytnik/.cshrc_hallb_install

== To add crate to epics db ==

* //not needed, will restart later cioc_cron 0 // to kill ioc
* cd0 (for old CAEN it will be cd0o, for mpod cd0m)
* edit in db_generator.cpp
* change: '''NCRATES, slot_mask, slot_types in the following piece:'''

///----------------- CRATES/SLOTS CONFIGURATION FOR IOC ----------------------------

#define NCRATES 1
#define NSLOTS 16
enum {A1535, A1520};
int NCHANNELS[2] = {24, 12};

int slot_mask[NCRATES][NSLOTS]=
{ {1, 0, 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} };//, // crate 0
//{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} }; // crate 1

int slot_types[NCRATES][NSLOTS]={

{A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535 }//, // crate 0
//{A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535 }//, // crate 1

};

///-------------------------------------------------------------------------

* g++ -o hv_gen db_generator.cpp

* ./hv_gen // produce hvprod.db
* add new crate to ''startup.all''
* cioc_cron 2 // to restart ioc

== To add crate to the Qt GUI ==

* qtcreator &

* file >> Open File or Project >> /misc/clas12/epics/qt/epicsqt_v1/hv_control/hv_control.pro
- click "Configure Project"
(next times: file >> Recent Projects >> /misc/clas12/epics/qt/epicsqt_v1/hv_control/hv_control.pro)
* expand "+sources"
* double click mainwindow.cpp to display the file
* In the following piece change: ''NCRATES, 'board_names_by_crate, board_types_by_crate, hv_crate_names, hv_crate_types'''

Comment: B_HV001_5_P0 stands for
- Hall B
- Crate 1
- slot 5
- all channels (P0)

//------------------- CRATES/SLOTS CONFIGURATION FOR GUI----------------------------

//==================CONFIGURATION PIECE==============================================================

char *board_names_by_crate[3][16]={

{"B_HV000_0_P0","B_HV000_2_P0","B_HV000_4_P0", "B_HV000_6_P0","B_HV000_7_P0","B_HV000_8_P0",
"B_HV000_9_P0","B_HV000_10_P0","B_HV000_11_P0","B_HV000_12_P0","B_HV000_13_P0","B_HV000_14_P0",
"B_HV000_15_P0" ,"","",""} ,

{"B_HV001_0_P0","B_HV001_1_P0","B_HV001_2_P0","B_HV001_3_P0","B_HV001_4_P0","B_HV001_5_P0", "B_HV001_6_P0","B_HV001_7_P0"
,"B_HV001_8_P0","B_HV001_9_P0","B_HV001_10_P0","B_HV001_11_P0","B_HV001_12_P0","B_HV001_13_P0","B_HV001_14_P0","B_HV001_15_P0"}

/// {"B_DCRB_HV000_0_P0","B_DCRB_HV000_1_P0","B_DCRB_HV000_2_P0","B_DCRB_HV000_3_P0","B_DCRB_HV000_4_P0","B_DCRB_HV000_5_P0","B_DCRB_HV000_6_P0",
/// "B_DCRB_HV000_7_P0","B_DCRB_HV000_8_P0", "B_DCRB_HV000_9_P0","","","" ,"","",""},

/// {"b_wmpod_hv000_0_P0","b_wmpod_hv000_1_P0","b_wmpod_hv000_2_P0","","","","","","","","","","" ,"","",""}
};

int board_types_by_crate[3][16]={

{HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535,0,0,0} ,

{HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535}

/// {HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944,
/// HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, 0,0,0, 0,0,0},

/// {HvCrate::WMPOD_HV,HvCrate::WMPOD_HV,HvCrate::WMPOD_HV,0, 0,0,0,0, 0,0,0,0, 0, 0,0,0}
};

char *hv_crate_names[]={"crate #1 \n CAEN 1527","crate #2 \n CAEN 1527", "crate \n CAEN 527", "crate \n Wiener MPOD"};

char hv_crate_types[]={CrateButton::CAEN_1527, CrateButton::CAEN_1527, CrateButton::CAEN_527, CrateButton::WMPOD };

//--------------------------------------------------------------------------------------------------------------

* click hammer sign (left-bottom corner) to build the project

* cdhv

* cp hv_control $CLAS/epics/bin/$EPICS_HOST_ARCH/

* hv_control // to start GUI

EPICS: IOC for MPOD

2013-12-05T18:56:45Z

129.57.86.64:

'''MPOD''' is the Wiener crates for HV and LV modules. Hall B currently uses following module types:

* EHS F205p-F : HV module, 16 channels, 0.5 kV, 10 mA, negative/positive, ripple < 5 mV

* MPV 8008I : LV module, 8 channels, range 0 - 8V, Imax 10A, peak power 50W/ch., V-res 0.5mV, I-res 0.5mA, ripple < 3mVpp

Manuals: [https://clonwiki.jlab.org/wiki/clondocs/Docs/WIENER_MPOD_Manual_2.6.1.pdf MPOD_2.6.1(pdf)], [https://clonwiki.jlab.org/wiki/clondocs/Docs/Manual_MPOD_LV-HV_2.7.pdf MPOD_LV_HV_2.7(pdf)]

Software resides in ''$EPICS/drivers/'', directories ''mpodCratesApp'', ''snmpApp'' and ''iocBoot/iocsnmp'' (startup scripts).

EPICS: IOC for MPOD

2013-12-05T18:53:42Z

129.57.86.64:

'''MPOD''' is the Wiener crates for HV and LV modules. Hall B currently uses following module types:

* EHS F205p-F : HV module, 16 channels, 0.5 kV, 10 mA, negative/positive, ripple < 5 mV

* MPV 8008I : LV module, 8 channels, range 0 - 8V, Imax 10A, peak power 50W/ch., V-res 0.5mV, I-res 0.5mA, ripple < 3mVpp

Manuals:

Software resides in ''$EPICS/drivers/'', directories ''mpodCratesApp'', ''snmpApp'' and ''iocBoot/iocsnmp'' (startup scripts).

EPICS: IOC for MPOD

2013-12-05T18:49:06Z

129.57.86.64:

EPICS: IOC for MPOD

2013-12-05T18:29:42Z

129.57.86.64: Created page with "'''MPOD''' is the Wiener crates for HV and LV modules. Hall B currently uses following module types: * EHS F205p-F : HV module, 16 channels, 0.5 kV, 10 mA, negative/positive, ri..."

CLON Index

2013-12-05T18:22:20Z

129.57.86.64:

[[akcp]] temperature/humidity etc sensors

[[Apache]]

[[automounts]]

[[Bertan MWPC]] High Voltage Power Supplies

[[Bootp]]

[[Cacti]]

[[CAEN A464]] caenet board (installed in sy527 mainframes)

[[CAEN A1535]] HV board

[[CAEN A1733 A1833]] 12/28 ch. 3kV/3mA, 4kV/2mA High Voltage Boards ( SY1527 / SY2527 / SY3527 Universal Multichannel System )

[[CAEN A1932A]] 48 ch. 3kV 500uA High Voltage Board ( SY1527 / SY2527 / SY3527 Universal Multichannel System )

[[CAEN A509H-L00]] 15 ch. 8V 500mA Low Voltage Board ( SY527 Universal Multichannel System )

[[CAEN SY1527 Mainframe]]

[[CAEN SY527 Mainframe]] and modules

[[CAEN V1190]] TDC board (128 ch 100 ps)

[[CAEN V1290]] TDC board (32 ch 25 ps)

[[CAEN V1495]] General Purpose VME Board

[[CAEN V1720]] Flash ADC VME Board

[[CAEN V288]]

[[CAEN V560]] scaler board

[[CAEN V775]] TDC Board

[[CAEN V792]] ADC Board

[[CAEN V895]] 16 ch. Leading Edge Discriminator with individual thresholds

[[Capfast]]

[[Cisco Switches]]

[[Clasweb]]

[[Clasxt]]

[[Clon00]]

[[Clon01]]

[[Clon02]]

[[Clon03]]

[[Clon04]]

[[Clon05]]

[[Clon06]]

[[Clon10]]

[[Clon20]]

[[Clondaq1]]

[[Clondaq2]]

[[Clondb1]]

[[Clondb2]]

[[Clondb3]]

[[Clonfs]] Main RAID System

[[Clonfs1]]

[[Clonfs2]]

[[clonhp]]

[[clonhp2]]

[[Clonmon]]

[[Clonmon0]]

[[Clonmon1]]

[[Clonmon2]]

[[Clonpc1]]

[[Clonpc2]]

[[Clonpc3]]

[[Clonpc5]]

[[Clonpc6]]

[[Clonpc8]]

[[Clontrig0]]

[[Clonusr1]]

[[Clonusr2]]

[[Clonusr3]]

[[Clonweb]]

[[Clonwiki]]

[[Coda]]

[[Compcontrol CC121]]

[[CycladesTS1000]]

[[DATEL DVME-628]]

[[DNS server]]

[[Electronics Documentation]]

[[EtherLite32]]

[[EPICS Base Installation]]

[[EPICS HALLB Installation]]

[[EPICS: Generation of IOC with different options and customization for HallB]]

[[EPICS: Software IOC]]

[[EPICS: vxWorks IOC]]

[[EPICS: Software IOC for CAEN HV]]

[[EPICS: IOC for MPOD]]

[[EPICS: generation of DBs and GUIs for HV]]

[[EPICS: CVS usage examples]]

[[EPICS: Timeline Histories]]

[[EPICS: Gamma Profiler]]

[[EPICS: EDM compilation and configuration]]

[[EPICS: HV : ADDING CRATES]]

[[ET system]] event transfer system package - part of CODA DAQ system

[[Event Monitor]]

[[EVIO]]

[[Fiber Channel Switches]]

[[FieldPoint]]

[[Flash ADC Studies]]

[[Foundry BigIron 15000 Switch]]

[[Foundry Switches]]

[[GE XVB601]] VME controller

[[GIT]] repository

[[Helicity Signals from MCC]]

[[Highland V450]]

[[Highland V851]]

[[HTML Help]]

[[HYTEC VSD2992]]

[[JAVA installation]]

[[JInventory]]

[[JLAB DCRB]] drift chamber readout board

[[JLAB Discriminators]]

[[JLAB FANIO]] VME TDC FanIO board for v1190/v1290 CAEN TDCs

[[JLAB FADC250]]

[[JLAB FLEXIO]]

[[JLAB LF]] VME Latch FIFO Board

[[JLAB LD]] VME Latch Driver Board

[[JLAB Level2 Majority]] Logic Unit

[[JLAB MLU]] VME Memory Lookup Unit (MLU)

[[JLAB OR]] VME Programmable “OR” Module

[[JLAB SD]] VXS Signal Distribution Module

[[JLAB TS2]] VXI D-size Trigger Supervisor Module

[[JLAB TI]] CODA Trigger Interface Cards

[[JLAB PCI TI]] PCI Trigger Interface Card

[[JLAB VME TI]] VME Trigger Interface Module

[[JLAB VME TID]] New VME/VXS Trigger Interface Module

[[JLAB VME VSCM]] New SVT Readout Module

[[Joerger VSC16]]

[[KineticSystems 2917]]

[[Labeling Machines]]

[[Linux Installation Procedure]]

[[Linux Customization on CLON Cluster]]

[[Lnf cluster]]

[[Mac OS X Installation Procedure]]

[[Motorola MVME230x]]

[[Motorola MVME5500]]

[[MRTG]]

[[mSQL]]

[[MySQL Installation]]

[[MySQL Usage]]

[[Nagios]]

[[Nagios Plugins]]

[[Net-SNMP]]

[[NFS]]

[[NIS server]]

[[Nrpe]]

[[Ntp]]

[[OMS VME44]] by Oregon Micro Systems

[[OMS VS4]] by Oregon Micro Systems

[[OpenSSL]]

[[PERL]]

[[PHP Help]]

[[Procmail]]

[[Proxy]]

[[PrPMC]]

[[QtDM]]

[[QtDM patches]]

[[QtEpics or EpicsQt]]

[[Qt New Project ]]

[[raidold]]

[[Routing]]

[[Rrdtool]]

[[SBS VIPC616]]

[[Scons]]

[[Serial Connections from Computer Ports]]

[[Sfs61]]

[[Slow Controls Time History]]

[[SmartSockets]]

[[SNMP]]

[[Software Documentation]]

[[Solaris Installation Procedure]]

[[Solaris Customization on CLON Cluster]]

[[Solaris Patches]]

[[SSH]]

[[Struck SIS3801]]

[[Sudo]]

[[SUN Microsystems]]

[[SYSTRAN VMESC5]]

[[SMI++]]

[[Tcl/Tk]]

[[Tftp]]

[[Troubleshooting printing]]

[[Tsi148]] VME Tempe controller

[[Universe II]] VME controller

[[UNIX Automount on CLON Cluster]]

[[UPS (Uninterruptible Power Supplies)]]

[[UPS CHB1]]

[[UPS CHB2]]

[[UPS Troubleshooting]]

[[VHDL programming]]

[[VI editor]]

[[VMIC VMIVME-3122]]

[[VMIC VMIVME-2120]]

[[VMIC VMIVME-1129]]

[[VMIC VMIVME-2232]]

[[VMIC VMIVME-6015]]

[[VMIC VMIVME-6016]]

[[VNC]]

[[WIENER]]

[[Wiki]]

[[Wiring]]

[[X server]]

[[Xycom DIO XVME-240]]

[[Xycom XVME-564]]

[[Xycom XVME-560]]

[[ZFS]]

Highland V851

2013-11-22T16:38:45Z

129.57.86.64: Created page with "Manual [https://clonwiki.jlab.org/wiki/clondocs/Docs/V850ManC2.pdf (pdf)]"

Manual [https://clonwiki.jlab.org/wiki/clondocs/Docs/V850ManC2.pdf (pdf)]

CLON Index

2013-11-22T16:30:23Z

129.57.86.64:

[[akcp]] temperature/humidity etc sensors

[[Apache]]

[[automounts]]

[[Bertan MWPC]] High Voltage Power Supplies

[[Bootp]]

[[Cacti]]

[[CAEN A464]] caenet board (installed in sy527 mainframes)

[[CAEN A1535]] HV board

[[CAEN A1733 A1833]] 12/28 ch. 3kV/3mA, 4kV/2mA High Voltage Boards ( SY1527 / SY2527 / SY3527 Universal Multichannel System )

[[CAEN A1932A]] 48 ch. 3kV 500uA High Voltage Board ( SY1527 / SY2527 / SY3527 Universal Multichannel System )

[[CAEN A509H-L00]] 15 ch. 8V 500mA Low Voltage Board ( SY527 Universal Multichannel System )

[[CAEN SY1527 Mainframe]]

[[CAEN SY527 Mainframe]] and modules

[[CAEN V1190]] TDC board (128 ch 100 ps)

[[CAEN V1290]] TDC board (32 ch 25 ps)

[[CAEN V1495]] General Purpose VME Board

[[CAEN V1720]] Flash ADC VME Board

[[CAEN V288]]

[[CAEN V560]] scaler board

[[CAEN V775]] TDC Board

[[CAEN V792]] ADC Board

[[CAEN V895]] 16 ch. Leading Edge Discriminator with individual thresholds

[[Capfast]]

[[Cisco Switches]]

[[Clasweb]]

[[Clasxt]]

[[Clon00]]

[[Clon01]]

[[Clon02]]

[[Clon03]]

[[Clon04]]

[[Clon05]]

[[Clon06]]

[[Clon10]]

[[Clon20]]

[[Clondaq1]]

[[Clondaq2]]

[[Clondb1]]

[[Clondb2]]

[[Clondb3]]

[[Clonfs]] Main RAID System

[[Clonfs1]]

[[Clonfs2]]

[[clonhp]]

[[clonhp2]]

[[Clonmon]]

[[Clonmon0]]

[[Clonmon1]]

[[Clonmon2]]

[[Clonpc1]]

[[Clonpc2]]

[[Clonpc3]]

[[Clonpc5]]

[[Clonpc6]]

[[Clonpc8]]

[[Clontrig0]]

[[Clonusr1]]

[[Clonusr2]]

[[Clonusr3]]

[[Clonweb]]

[[Clonwiki]]

[[Coda]]

[[Compcontrol CC121]]

[[CycladesTS1000]]

[[DATEL DVME-628]]

[[DNS server]]

[[Electronics Documentation]]

[[EtherLite32]]

[[EPICS Base Installation]]

[[EPICS HALLB Installation]]

[[EPICS: Generation of IOC with different options and customization for HallB]]

[[EPICS: Software IOC]]

[[EPICS: vxWorks IOC]]

[[EPICS: Software IOC for CAEN HV]]

[[EPICS: generation of DBs and GUIs for HV]]

[[EPICS: CVS usage examples]]

[[EPICS: Timeline Histories]]

[[EPICS: Gamma Profiler]]

[[EPICS: EDM compilation and configuration]]

[[EPICS: HV : ADDING CRATES]]

[[ET system]] event transfer system package - part of CODA DAQ system

[[Event Monitor]]

[[EVIO]]

[[Fiber Channel Switches]]

[[FieldPoint]]

[[Flash ADC Studies]]

[[Foundry BigIron 15000 Switch]]

[[Foundry Switches]]

[[GE XVB601]] VME controller

[[GIT]] repository

[[Helicity Signals from MCC]]

[[Highland V450]]

[[Highland V851]]

[[HTML Help]]

[[HYTEC VSD2992]]

[[JAVA installation]]

[[JInventory]]

[[JLAB DCRB]] drift chamber readout board

[[JLAB Discriminators]]

[[JLAB FANIO]] VME TDC FanIO board for v1190/v1290 CAEN TDCs

[[JLAB FADC250]]

[[JLAB FLEXIO]]

[[JLAB LF]] VME Latch FIFO Board

[[JLAB LD]] VME Latch Driver Board

[[JLAB Level2 Majority]] Logic Unit

[[JLAB MLU]] VME Memory Lookup Unit (MLU)

[[JLAB OR]] VME Programmable “OR” Module

[[JLAB SD]] VXS Signal Distribution Module

[[JLAB TS2]] VXI D-size Trigger Supervisor Module

[[JLAB TI]] CODA Trigger Interface Cards

[[JLAB PCI TI]] PCI Trigger Interface Card

[[JLAB VME TI]] VME Trigger Interface Module

[[JLAB VME TID]] New VME/VXS Trigger Interface Module

[[JLAB VME VSCM]] New SVT Readout Module

[[Joerger VSC16]]

[[KineticSystems 2917]]

[[Labeling Machines]]

[[Linux Installation Procedure]]

[[Linux Customization on CLON Cluster]]

[[Lnf cluster]]

[[Mac OS X Installation Procedure]]

[[Motorola MVME230x]]

[[Motorola MVME5500]]

[[MRTG]]

[[mSQL]]

[[MySQL Installation]]

[[MySQL Usage]]

[[Nagios]]

[[Nagios Plugins]]

[[Net-SNMP]]

[[NFS]]

[[NIS server]]

[[Nrpe]]

[[Ntp]]

[[OMS VME44]] by Oregon Micro Systems

[[OMS VS4]] by Oregon Micro Systems

[[OpenSSL]]

[[PERL]]

[[PHP Help]]

[[Procmail]]

[[Proxy]]

[[PrPMC]]

[[QtDM]]

[[QtDM patches]]

[[QtEpics or EpicsQt]]

[[Qt New Project ]]

[[raidold]]

[[Routing]]

[[Rrdtool]]

[[SBS VIPC616]]

[[Scons]]

[[Serial Connections from Computer Ports]]

[[Sfs61]]

[[Slow Controls Time History]]

[[SmartSockets]]

[[SNMP]]

[[Software Documentation]]

[[Solaris Installation Procedure]]

[[Solaris Customization on CLON Cluster]]

[[Solaris Patches]]

[[SSH]]

[[Struck SIS3801]]

[[Sudo]]

[[SUN Microsystems]]

[[SYSTRAN VMESC5]]

[[SMI++]]

[[Tcl/Tk]]

[[Tftp]]

[[Troubleshooting printing]]

[[Tsi148]] VME Tempe controller

[[Universe II]] VME controller

[[UNIX Automount on CLON Cluster]]

[[UPS (Uninterruptible Power Supplies)]]

[[UPS CHB1]]

[[UPS CHB2]]

[[UPS Troubleshooting]]

[[VHDL programming]]

[[VI editor]]

[[VMIC VMIVME-3122]]

[[VMIC VMIVME-2120]]

[[VMIC VMIVME-1129]]

[[VMIC VMIVME-2232]]

[[VMIC VMIVME-6015]]

[[VMIC VMIVME-6016]]

[[VNC]]

[[WIENER]]

[[Wiki]]

[[Wiring]]

[[X server]]

[[Xycom DIO XVME-240]]

[[Xycom XVME-564]]

[[Xycom XVME-560]]

[[ZFS]]

EPICS: HV : ADDING CRATES

2013-11-22T16:13:57Z

129.57.86.64: /* To add crate to epics db */

* ssh clonioc1
* source ~sytnik/.cshrc_hallb_install

== To add crate to epics db ==

* //not needed, will restart later cioc_cron 0 // to kill ioc
* cd0 (for old CAEN it will be cd0o, for mpod cd0m)
* edit in db_generator.cpp
* change: '''NCRATES, slot_mask, slot_types in the following piece:'''

///----------------- CRATES/SLOTS CONFIGURATION FOR IOC ----------------------------

#define NCRATES 1
#define NSLOTS 16
enum {A1535, A1520};
int NCHANNELS[2] = {24, 12};

int slot_mask[NCRATES][NSLOTS]=
{ {1, 0, 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} };//, // crate 0
//{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} }; // crate 1

int slot_types[NCRATES][NSLOTS]={

{A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535 }//, // crate 0
//{A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535, A1535 }//, // crate 1

};

///-------------------------------------------------------------------------

* g++ -o hv_gen db_generator.cpp

* ./hv_gen // produce hvprod.db
* cioc_cron 2 // to restart ioc

== To add crate to the Qt GUI ==

* qtcreator &

* file >> Open File or Project >> /misc/clas12/epics/qt/epicsqt_v1/hv_control/hv_control.pro
- click "Configure Project"
(next times: file >> Recent Projects >> /misc/clas12/epics/qt/epicsqt_v1/hv_control/hv_control.pro)
* expand "+sources"
* double click mainwindow.cpp to display the file
* In the following piece change: '''board_names_by_crate, board_types_by_crate, hv_crate_names, hv_crate_types'''

Comment: B_HV001_5_P0 stands for
- Hall B
- Crate 1
- slot 5
- all channels (P0)

//------------------- CRATES/SLOTS CONFIGURATION FOR GUI----------------------------

//==================CONFIGURATION PIECE==============================================================

char *board_names_by_crate[3][16]={

{"B_HV000_0_P0","B_HV000_2_P0","B_HV000_4_P0", "B_HV000_6_P0","B_HV000_7_P0","B_HV000_8_P0",
"B_HV000_9_P0","B_HV000_10_P0","B_HV000_11_P0","B_HV000_12_P0","B_HV000_13_P0","B_HV000_14_P0",
"B_HV000_15_P0" ,"","",""} ,

{"B_HV001_0_P0","B_HV001_1_P0","B_HV001_2_P0","B_HV001_3_P0","B_HV001_4_P0","B_HV001_5_P0", "B_HV001_6_P0","B_HV001_7_P0"
,"B_HV001_8_P0","B_HV001_9_P0","B_HV001_10_P0","B_HV001_11_P0","B_HV001_12_P0","B_HV001_13_P0","B_HV001_14_P0","B_HV001_15_P0"}

/// {"B_DCRB_HV000_0_P0","B_DCRB_HV000_1_P0","B_DCRB_HV000_2_P0","B_DCRB_HV000_3_P0","B_DCRB_HV000_4_P0","B_DCRB_HV000_5_P0","B_DCRB_HV000_6_P0",
/// "B_DCRB_HV000_7_P0","B_DCRB_HV000_8_P0", "B_DCRB_HV000_9_P0","","","" ,"","",""},

/// {"b_wmpod_hv000_0_P0","b_wmpod_hv000_1_P0","b_wmpod_hv000_2_P0","","","","","","","","","","" ,"","",""}
};

int board_types_by_crate[3][16]={

{HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535,0,0,0} ,

{HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535,
HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535, HvCrate::CAEN_A1535}

/// {HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944,
/// HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, HvCrate::CAEN_A944, 0,0,0, 0,0,0},

/// {HvCrate::WMPOD_HV,HvCrate::WMPOD_HV,HvCrate::WMPOD_HV,0, 0,0,0,0, 0,0,0,0, 0, 0,0,0}
};

char *hv_crate_names[]={"crate #1 \n CAEN 1527","crate #2 \n CAEN 1527", "crate \n CAEN 527", "crate \n Wiener MPOD"};

char hv_crate_types[]={CrateButton::CAEN_1527, CrateButton::CAEN_1527, CrateButton::CAEN_527, CrateButton::WMPOD };

//--------------------------------------------------------------------------------------------------------------

* look for:

crates_number=

and change it.

* click hammer sign (left-bottom corner) to build the project

* cdhv

* cp hv_control $CLAS/epics/bin/$EPICS_HOST_ARCH/.

* hv_control // to start GUI

Automounts

2013-11-12T21:17:55Z

129.57.86.64: /* RHEL4 */

== '''Solaris''' ==

Solaris automounts on CLON cluster controls by following files:

'''/etc/auto_master'''

/- /etc/auto_direct
/- auto_direct.ep
/u auto.u.ep
/w auto.w.ep

''Specific for mounting Computer Center /w areas at higher speed:''

instead of line
/w auto.w.ep

insert line
/w /etc/auto_stage

and create ''/etc/auto_stage'' file containing following:

stage0 -rsize=1048576,wsize=1048576 sfs61:/export/stage
stage1 -rsize=1048576,wsize=1048576 sfs56:/export/stage
stage2 -rsize=1048576,wsize=1048576 sfs59:/export/stage
+auto.w.ep

'''/etc/auto_direct''' (replace ''SunOS_sun4u'' by ''SunOS_i86pc'' for Opteron/Intel-based Solaris machines)

#
# auto_direct
#
#machine-dependent system directories
/apps -rw,bg clonfs1:/vol/apps/SunOS_sun4u
/usr/local -rw,bg clonfs1:/vol/local/SunOS_sun4u
#machine-independent system directories
/mnt/downloads -rw,bg clonfs1:/vol/downloads
/home -rw,bg clonfs1:/vol/home
/work -rw,bg clonfs1:/vol/work
/scratch -rw,bg clonfs1:/vol/scratch
#machine-independent clas directories
/usr/clas -rw,bg clonfs1:/vol/clas
/mnt/archives -rw,bg clonfs1:/vol/archives
/mnt/logs -rw,bg clonfs1:/vol/logs
#

#some machines are using following mounts from clon10
/data -rw,bg clon10:/data
/raidold -rw,bg clon10:/raidold

#clon00/clon10 admin clonfs1/clonfs2 mounts
/mnt/admin/clonfs2 -rw,bg clonfs2:/
/mnt/admin/clonfs1 -rw,bg clonfs1:/
/mnt/admin/clonfs1-apps -rw,bg clonfs1:/vol/apps
/mnt/admin/clonfs1-archives -rw,bg clonfs1:/vol/archives
/mnt/admin/clonfs1-clas -rw,bg clonfs1:/vol/clas
/mnt/admin/clonfs1-clonweb -rw,bg clonfs1:/vol/clonweb
/mnt/admin/clonfs1-clonwiki -rw,bg clonfs1:/vol/clonwiki
/mnt/admin/clonfs1-downloads -rw,bg clonfs1:/vol/downloads
/mnt/admin/clonfs1-home -rw,bg clonfs1:/vol/home
/mnt/admin/clonfs1-local -rw,bg clonfs1:/vol/local
/mnt/admin/clonfs1-logs -rw,bg clonfs1:/vol/logs
/mnt/admin/clonfs1-mysql -rw,bg clonfs1:/vol/mysql
/mnt/admin/clonfs1-scratch -rw,bg clonfs1:/vol/scratch
/mnt/admin/clonfs1-work -rw,bg clonfs1:/vol/work
#

It is important to run cronjobs on clon00 to access those directories occationally to keep them mounted, so Nagios can check their free space.

'''Solaris symbolic links'''

cd /
ln -s /u/site site

== '''RHEL5''' ==

'''Linux symbolic links''' (because of Linux automount limitations we cannot do the same as on Solaris, must use symbolic links):

cd /
ln -s /u/site site
mv home home.orig
mv apps apps.orig
ln -s /misc/apps apps
ln -s /misc/home home
ln -s /misc/work work
mv scratch scratch.orig
ln -s /misc/scratch scratch
ln -s /usr/clas/archives/hist hist
cd /usr
mv local local.orig
ln -s /misc/local local
ln -s /misc/clas clas
ln -s /misc/clas12 clas12
cd /mnt
ln -s /misc/logs logs
ln -s /misc/archives archives

'''NOTE''': if some of existing directory are actual partitions mounted in ''/etc/fstab'', you cannot remove or move them. Instead, do ''umount'' and comment out appropriate line in ''/etc/fstab''. After that remaining directory can be moved/removed.

'''/etc/auto.master''' must looks like following (for 64bit, use -DOSNAME=Linux-RHEL5-64);
/misc /etc/auto.misc --timeout 60
/u yp:auto.u.bb -DOSNAME=Linux-RHEL5

'''/etc/auto.misc''' (replace ''Linux_i686'' by ''Linux_ppc'' or ''Linux_x86_64'' for corresponding machines)

#
# auto.misc
#
cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
#machine-dependent system directories
apps -rw,bg clonfs1:/vol/apps/RHEL5_i686
local -rw,bg clonfs1:/vol/local/RHEL5_i686
#machine-independent system directories
downloads -rw,bg clonfs1:/vol/downloads
home -rw,bg clonfs1:/vol/home
work -rw,bg clonfs1:/vol/work
scratch -rw,bg clonfs1:/vol/scratch
#machine-independent clas directories
clas -rw,bg clonfs1:/vol/clas
clas12 -rw,bg clonfs1:/vol/clas12
archives -rw,bg clonfs1:/vol/archives
logs -rw,bg clonfs1:/vol/logs
# diskless
diskless -rw,bg clonfs1:/vol/diskless
#

#clonweb only
clonweb -rw,bg clonfs1:/vol/clonweb

#clondb1 only
mysql -rw,bg clonfs1:/vol/mysql

Run ''/etc/init.d/autofs restart'' (or ''reload''). Make sure everything is mounted. If does not, reboot the machine.

Make links to the Computer Center stuff in ''/usr/local'' area (only once when first RHEL5 machine of particular flavor is configured):
cd /usr/local/bin
ln -s /usr/local.orig/bin/jlab-linux-config jlab-linux-config
ln -s /usr/local.orig/bin/jlab-satellite-connect jlab-satellite-connect
ln -s /usr/local.orig/bin/mkdisk mkdisk
ln -s /usr/local.orig/bin/satellite_checkin.pl satellite_checkin.pl
ln -s /usr/local.orig/bin/update_crontab update_crontab
cd /usr/local/etc
ln -s /etc/motd motd

== '''RHEL4''' ==

Linux automounts on CLON cluster controls by following files:

'''/etc/auto.master'''

/u auto.u.bb --timeout 0 -DOSNAME=Linux-RHEL4
/w auto.w.bb -v -d -g
/misc /etc/auto.misc

'''/etc/auto.misc''' (replace ''Linux_i686'' by ''Linux_ppc'' or ''Linux_x86_64'' for corresponding machines)

#
# auto.misc
#
cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
#machine-dependent system directories
apps -rw,bg clonfs1:/vol/apps/Linux_i686
local -rw,bg clonfs1:/vol/local/Linux_i686
#machine-independent system directories
downloads -rw,bg clonfs1:/vol/downloads
home -rw,bg clonfs1:/vol/home
work -rw,bg clonfs1:/vol/work
scratch -rw,bg clonfs1:/vol/scratch
#machine-independent clas directories
clas -rw,bg clonfs1:/vol/clas
archives -rw,bg clonfs1:/vol/archives
logs -rw,bg clonfs1:/vol/logs
#

#clonweb only
clonweb -rw,bg clonfs1:/vol/clonweb

#clondb1 only
mysql -rw,bg clonfs1:/vol/mysql

'''Linux symbolic links''' (because of Linux automount limitations we cannot do the same as on Solaris, must use symbolic links)358-3042,

cd /
ln -s /u/site site
mv home home.orig
rm -f apps
ln -s /misc/apps apps
ln -s /misc/home home
ln -s /misc/work work
ln -s /misc/scratch scratch
ln -s /usr/clas/archives/hist hist
cd /usr
mv local local.orig
ln -s /misc/local local
ln -s /misc/clas clas
ln -s /misc/clas12 clas12
cd /mnt
ln -s /misc/logs logs
ln -s /misc/archives archives